.png "EBOOKBKMT")
ISO 22915-16 Industrial trucks — Verification of stability Part 16: Pedestrian-propelled trucks (Full)
.png)
ISO 22915-16 là bộ tiêu chuẩn quốc tế quy định các phương pháp thử nghiệm và yêu cầu để kiểm tra độ ổn định của xe nâng/xe đẩy công nghiệp do người đi bộ đẩy/dắt (pedestrian-propelled industrial trucks).
This document specifies tests for verifying the stability of pedestrian-propelled trucks.
It is applicable to:
— stacker, pallet and pallet stacker trucks with capacities not exceeding 1 000 kg, with manual or battery-powered lift;
— scissor-lift pallet trucks with lift heights up to 1 000 mm and rated capacity up to 1 500 kg, with manual or battery-powered lift;
— platform trucks.
It also applies to trucks operating under the same conditions when equipped with load-handling attachments.
It is not applicable to trucks with retractable devices such as a retractable mast or retractable fork carrier.
CONTENTS:
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Position of the truck on the tilt table
4.2.1 General
4.2.2 Load and steer axles
4.2.3 Tests 1, 2, 4, 7 and 8 for longitudinal direction of test
4.2.4 Tests 3, 5, 6, 9 and 10 for lateral direction of test
5 Verification of stability
5.1 Dynamic test — Platform trucks
5.2 Tilt table tests
Bibliography
ISO 22915-16:2014 Industrial trucks — Verification of stability Part 16: Pedestrian-propelled trucks
LINK ĐẶT MUA TÀI LIỆU ONLINE 1
LINK DOWNLOAD (VIP)
ISO 22915-16:2024 Industrial trucks — Verification of stability Part 16: Pedestrian-propelled trucks
LINK ĐẶT MUA TÀI LIỆU ONLINE 1
LINK DOWNLOAD (UPDATING...)
ISO 22915-16 là bộ tiêu chuẩn quốc tế quy định các phương pháp thử nghiệm và yêu cầu để kiểm tra độ ổn định của xe nâng/xe đẩy công nghiệp do người đi bộ đẩy/dắt (pedestrian-propelled industrial trucks).
This document specifies tests for verifying the stability of pedestrian-propelled trucks.
It is applicable to:
— stacker, pallet and pallet stacker trucks with capacities not exceeding 1 000 kg, with manual or battery-powered lift;
— scissor-lift pallet trucks with lift heights up to 1 000 mm and rated capacity up to 1 500 kg, with manual or battery-powered lift;
— platform trucks.
It also applies to trucks operating under the same conditions when equipped with load-handling attachments.
It is not applicable to trucks with retractable devices such as a retractable mast or retractable fork carrier.
CONTENTS:
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Position of the truck on the tilt table
4.2.1 General
4.2.2 Load and steer axles
4.2.3 Tests 1, 2, 4, 7 and 8 for longitudinal direction of test
4.2.4 Tests 3, 5, 6, 9 and 10 for lateral direction of test
5 Verification of stability
5.1 Dynamic test — Platform trucks
5.2 Tilt table tests
Bibliography
ISO 22915-16:2014 Industrial trucks — Verification of stability Part 16: Pedestrian-propelled trucks
LINK ĐẶT MUA TÀI LIỆU ONLINE 1
LINK DOWNLOAD (VIP)
ISO 22915-16:2024 Industrial trucks — Verification of stability Part 16: Pedestrian-propelled trucks
LINK ĐẶT MUA TÀI LIỆU ONLINE 1
LINK DOWNLOAD (UPDATING...)
.png)
.png "Hướng dẫn download ti liệu")
.png "Hướng dẫn download ti liệu")
.png)
.png)
.png "Hướng dẫn, hỗ trợ tìm kiếm tài liệu học tập và tư vấn hỏi đáp")
.png "SÁCH - Cẩm nang thợ điện tự học - Từ phổ thông tới thợ điện (Nguyễn Văn Phong) Full")
.png "Gói Hội Viên EBOOKBKMT - Hỗ trợ tìm kiếm tài liệu nhanh nhất, ưu tiên cho Hội Viên EBOOKBKMT")
Không có nhận xét nào: