TÀI LIỆU - Két làm mát dầu dạng tấm hàn - Water Oil Cooler PWO (Olaer/Parker)



The PWOis a compact and lightweight water oil cooler with a high cooling capacity for the cooler size. This lightweight and compact water oil cooler consists of corrugated channel plates sandwiched between the front and rear cover plates. The channel plates are pressed and vacuum brazed in the same automated procedure, and with rigorous standards of quality control.

The unique plate design provides high turbulent flow conditions throughout the cooler, the key to efficient cooling. This turbulent flow reduces the risk for  clogging, which in turn makes this PWO virtually maintenance free. 


PWO WATER OIL COOLER


• Light and compact

• Suitable for many applications

• Ease of installation

• Cost efficient and environmentally friendly 


A wide number of possibilities


The unique design emphasizes a number of possibilities for versatile and efficient solutions. 

The PWO can easily be adapted to a variety of needs and special applications including seawater, aggressive oils, high pressure and high temperature applications.

With a PWO water oil cooler in your system, you can be assured that the fluid in your system is working at the correct temperature and provide maximum performance and safety in your system.


PWO Technical information


PWO STANDARDrange of water oil coolers is available in a wide number of sizes and is in general available for immediate off-the-shelf delivery. The basic material is AISI 316 stainless steel, vacuum brazed with pure copper. PWO requires little refrigerant volume resulting in lower cost and a more environmentally-friendly installation. 

Low installation cost allows for oversizing to accommodate for future increase in requirements or peak loads. 


WORKING PRINCIPLE


PWO  Plate  Water  Oil  coolers  are  manufactured  by  layering stainless  steel  plates  between  foils  of  copper.  The  special embossed pattern of each plate is reversed on every other plate, creating a lattice of contact points between adjacent ridges. The brazing process in a vacuum furnace melts down the copper, producing a compact and pressure resistant cooler package.

Oil  and  water  circulate  with  a  very  high  level  of  turbulence between  the  plates  and  in  an  opposite  direction.  Perfectly tuned flow rates will provide an outlet oil temperature similar to the water temperature. This concept is progressively replacing the  shell  and  tubes  models,  as  it  greatly  reduces  the  water consumption in a much smaller package.









LINK 1 - TÌM KIẾM SÁCH/TÀI LIỆU ONLINE (GIÁ ƯU ĐÃI NHẤT)

LINK 2 - TÌM KIẾM SÁCH/TÀI LIỆU ONLINE (GIÁ ƯU ĐÃI NHẤT)

LINK 3 - TÌM KIẾM SÁCH/TÀI LIỆU ONLINE (GIÁ ƯU ĐÃI NHẤT)

LINK 4 - TÌM KIẾM SÁCH/TÀI LIỆU ONLINE (GIÁ ƯU ĐÃI NHẤT)


Thiết bị trao đổi nhiệt kiểu tấm bản - Dàn ngưng tụ kiểu tấm bản (Plate Heat Exchanger)


TÀI LIỆU THAM KHẢO:


LINK DOWNLOAD TÀI LIỆU HÃNG OLAER

LINK DOWNLOAD TÀI LIỆU HÃNG PARKER


VIDEO THAM KHẢO:






Nguyên lý hoạt động thiết bị trao đổi nhiệt kiểu tấm bản (Plate heat exchanger)

Có 02 loại chính là loại sử dụng gasket đệm và kết nối hàn giữa các tấm


Chúc các bạn thành công!



The PWOis a compact and lightweight water oil cooler with a high cooling capacity for the cooler size. This lightweight and compact water oil cooler consists of corrugated channel plates sandwiched between the front and rear cover plates. The channel plates are pressed and vacuum brazed in the same automated procedure, and with rigorous standards of quality control.

The unique plate design provides high turbulent flow conditions throughout the cooler, the key to efficient cooling. This turbulent flow reduces the risk for  clogging, which in turn makes this PWO virtually maintenance free. 


PWO WATER OIL COOLER


• Light and compact

• Suitable for many applications

• Ease of installation

• Cost efficient and environmentally friendly 


A wide number of possibilities


The unique design emphasizes a number of possibilities for versatile and efficient solutions. 

The PWO can easily be adapted to a variety of needs and special applications including seawater, aggressive oils, high pressure and high temperature applications.

With a PWO water oil cooler in your system, you can be assured that the fluid in your system is working at the correct temperature and provide maximum performance and safety in your system.


PWO Technical information


PWO STANDARDrange of water oil coolers is available in a wide number of sizes and is in general available for immediate off-the-shelf delivery. The basic material is AISI 316 stainless steel, vacuum brazed with pure copper. PWO requires little refrigerant volume resulting in lower cost and a more environmentally-friendly installation. 

Low installation cost allows for oversizing to accommodate for future increase in requirements or peak loads. 


WORKING PRINCIPLE


PWO  Plate  Water  Oil  coolers  are  manufactured  by  layering stainless  steel  plates  between  foils  of  copper.  The  special embossed pattern of each plate is reversed on every other plate, creating a lattice of contact points between adjacent ridges. The brazing process in a vacuum furnace melts down the copper, producing a compact and pressure resistant cooler package.

Oil  and  water  circulate  with  a  very  high  level  of  turbulence between  the  plates  and  in  an  opposite  direction.  Perfectly tuned flow rates will provide an outlet oil temperature similar to the water temperature. This concept is progressively replacing the  shell  and  tubes  models,  as  it  greatly  reduces  the  water consumption in a much smaller package.









LINK 1 - TÌM KIẾM SÁCH/TÀI LIỆU ONLINE (GIÁ ƯU ĐÃI NHẤT)

LINK 2 - TÌM KIẾM SÁCH/TÀI LIỆU ONLINE (GIÁ ƯU ĐÃI NHẤT)

LINK 3 - TÌM KIẾM SÁCH/TÀI LIỆU ONLINE (GIÁ ƯU ĐÃI NHẤT)

LINK 4 - TÌM KIẾM SÁCH/TÀI LIỆU ONLINE (GIÁ ƯU ĐÃI NHẤT)


Thiết bị trao đổi nhiệt kiểu tấm bản - Dàn ngưng tụ kiểu tấm bản (Plate Heat Exchanger)


TÀI LIỆU THAM KHẢO:


LINK DOWNLOAD TÀI LIỆU HÃNG OLAER

LINK DOWNLOAD TÀI LIỆU HÃNG PARKER


VIDEO THAM KHẢO:






Nguyên lý hoạt động thiết bị trao đổi nhiệt kiểu tấm bản (Plate heat exchanger)

Có 02 loại chính là loại sử dụng gasket đệm và kết nối hàn giữa các tấm


Chúc các bạn thành công!

M_tả
M_tả

Không có nhận xét nào: